Ideally we would have a flag or something so the caller could choose
to handle symlinks, or traverse them. But since all callers currently
don't handle symlinks just handle them in the iterator.
Beyond fixing the early termination due to a failed symlink this also
fixes another case of failure in one job cause dir based loads to
terminate early. Which can result in partial loads.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/215
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/850
Signed-off-by: John Johansen <john.johansen@canonical.com>
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Library versioning requires we keep these changes in sync. Since the
3.0.4 release bumped revision we need to do it here as well.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently libapparmor fails to build when lto is used because it uses
the asm directive to provide different version of some symbols.
Unfortunately gcc does not recognize this and the symbols defined by
asm are lost and optimized out by lto and then the link fails.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/214
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/831
Signed-off-by: John Johansen <john.johansen@canonical.com>
The Hack used to build the libapparmor swig interface for ruby fails
with ruby 3.1. Instead of trying to do black magic in ruby to rename
the generated Makefile to Makefile.new, just save off the Makefile
and restore after ruby's setup has been called.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/206
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
Some STATUS log events trigger a crash in aa-notify because the log
line doesn't have operation=. Examples are:
type=AVC msg=audit(1630913351.586:4): apparmor="STATUS" info="AppArmor Filesystem Enabled" pid=1 comm="swapper/0"
type=AVC msg=audit(1630913352.610:6): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
Fix this by not looking at log events without operation=
Also add one of the example events as libapparmor testcase.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/194
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/797
Acked-by: John Johansen <john.johansen@canonical.com>
The default log format for void linux is not handled by current log
parsing. The following example message results in an invalid record
error.
2021-09-11T20:57:41.91645 kern.notice: [ 469.180605] audit: type=1400 audit(1631392703.952:3): apparmor="ALLOWED" operation="mkdir" profile="/usr/bin/kak" name="/run/user/1000/kakoune/" pid=2545 comm="kak" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
This log message fails on parsing
kern.notice:
which differs from the expect syslog format of
host_name kernel:
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/196
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/799
Signed-off-by: John Johansen <john.johansen@canonical.com>
When building with YYDEBUG=1 the following failure occurs
grammar.y:49:46: error: unknown type name ‘no_debug_unused_’; did you mean ‘debug_unused_’?
void aalogparse_error(unused_ void *scanner, no_debug_unused_ char const *s)
^~~~~~~~~~~~~~~~
debug_unused_
g
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/799
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some STATUS log events trigger a crash in aa-notify because the log
line doesn't have operation=. Examples are:
type=AVC msg=audit(1630913351.586:4): apparmor="STATUS" info="AppArmor Filesystem Enabled" pid=1 comm="swapper/0"
type=AVC msg=audit(1630913352.610:6): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
Fix this by not looking at log events without operation=
Also add one of the example events as libapparmor testcase.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/194
Adjust the interface check and fallback. Unfortunately there is no
solution that will fix all failure cases. Instead try to minimize
the failure cases and bias towards failures that don't cause a
regression under an old parser/policy.
Note: In cases where we absolutely know the interface should not
be accessed fail those accesses imediately instead of relying
on what ever LSM active to handle it.
While we are at it document the interfaces and failure cases.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make it easier to separate errors from an actual answer, and ensure
we do a fallback check if there was an error.
Also fix the error code returned from aa_is_enabled() which got
broken by the addition of the private_enabled() check.
Finally make sure the private enabled error code is documented.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parameter that is landing upstream in "available" not
"private_enabled".
Also set the correct variable, as previously we were not.
Note: that skipping checking available for the private apparmor
proc interfaces is okay, as the dedicated apparmor interfaces will
fail correctly if available is False.
This just gives a clear way for userspace to query this info without
having to resort to error codes that access to the private interfaces
would return.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
libapparmor performs a test for the new stacking interface, however
how it does this test is problematic as it requires all confined
tasks to be given read access to the task introspection interface.
This results in tasks needing to be given read access to the interface
even if they don't need it. Making it possible for tasks to discover
their confinement even if they are not supposed to be able to.
Instead change the check to using stat on the parent directory.
This will generate a getattr request instead of read and make it
on the directory instead of on any interface file that could be
used to obtain information.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
Doing so adds the $ac_tool_prefix during cross compilation and will end up using the correct, architecture-dependent python-config.
This is the second and last upstreamable change from https://bugs.debian.org/984582. It looks a little simpler here, because apparmor evolved upstream compared to the Debian version. Fortunately, it got a lot simpler in the process.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/729
Acked-by: John Johansen <john.johansen@canonical.com>
Doing so adds the $ac_tool_prefix during cross compilation and will end
up using the correct, architecture-dependent python-config.
Link: https://bugs.debian.org/984582
AC_CHECK_FILE is meant to check for host files and therefore fails hard during cross compilation unless one supplies a cached check result. Here we want to know about the presence of a build system file though, so AC_CHECK_FILE is the wrong tool.
Directory traversal does not have a guaranteed walk order which can
cause ordering problems on profile loads when explicit dependencies
are missing.
Combined with MR:703 this provides a userspace work around for issue
147.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/147
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/706
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
There is currently a case in which proc_attr_base won't get set when
asprintf is able to generate the path, but the file doesn't exist, it
will exit proc_attr_base_init_once() without proc_attr_base having been
set as the fall-through if/else logic will get bypassed when asprintf is
successful.
libraries/libapparmor/swig/python/Makefile.am:
Add global LDFLAGS when building the python library.
When only applying the custom PYTHON_LDFLAGS (which are in fact
`python-config --ldflags`) distributions are unable to build the library
with e.g. full RELRO.
Fixes#129
Related to #138
libapparmor on startup does detection of whether the new stacking
proc interfaces are available and then store a var for which interface
should be used. This avoids libapparmor needing to detect which interface
to use on each proc based api call.
Unfortunately if the domain is changed on the task via change_hat or
change_profile and the proc interface is used after the domain change
it is possible that access to the interface will be denied by policy.
This is not a problem in and of it self except policy may have been
created assuming the old interface.
Fix this by adding a fallback that tries the old interface if we
are using the new interface by default and the failure was due to
an EACCES denial (policy based).
Also refactor the code a bit so this retry is isolated to one function
instead of adding it in two places.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/131
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/681
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
With the exception of the documentation fixes, these should all be
invisible to users.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/687
While `include/sys/apparmor.h` makes use of `socklen_t`, it doesn't include the `<sys/socket.h>` header to make its declaration available. While this works on systems using glibc via transitive includes, it breaks compilation on musl libc.
Fix the issue by including the header.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/642
Acked-by: John Johansen <john.johansen@canonical.com>
While `_aa_asprintf` is supposed to be of private visibility, it's used
by apparmor_parser and thus required to be visible when linking. This
commit thus adds it to the list of private symbols to make it available
for linking in apparmor_parser.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
With AppArmor release 3.0, a new function `aa_features_new_from_file`
was added, but not added to the list of public symbols. As a result,
it's not possible to make use of this function when linking against
libapparmor.so.
Fix the issue by adding it to the symbol map.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
While `include/sys/apparmor.h` makes use of `socklen_t`, it doesn't
include the `<sys/socket.h>` header to make its declaration available.
While this works on systems using glibc via transitive includes, it
breaks compilation on musl libc.
Fix the issue by including the header.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Add a basic tool for manipulating the apparmor features abi via
libapparmor. This serves as a basic tool and as an example of using
the library api.
Currently its function is limited to extracting the kernel feature
abi and loading a feature abi from a file and then outputing it.
In the future it will pickup the ability to verify the feature
abi, and merge feature abis.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/613
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Note that the log doesn't include enough information for EXEC MODE and
EXEC COND, therefore aa-logprof will always propose ALL as EXEC COND
(comm= might give a hint about EXEC COND, but isn't good enough).
With the added support in aa-logprof, remove the changeprofile tests
from the known-failing list in test-libapparmor-test_multi.py.
Also add another test log (from darix) / expected profile to the
libapparmor testsuite.
Nobody told the tools that log events with operation="symlink" exist. Add this keyword to the list of file or network operations (I don't expect network symlinks ;-) but keeping everything in that list makes things easier than special-casing it.)
Also add the log sample and expected result to the libapparmor tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/107
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/587
Acked-by: John Johansen <john.johansen@canonical.com>
Nobody told the tools that log events with operation="symlink" exist.
Add this keyword to the list of file or network operations (I don't
expect network symlinks ;-) but keeping everything in that list makes
things easier than special-casing it.)
Also add the log sample and expected result to the libapparmor tests.
Fixes https://gitlab.com/apparmor/apparmor/-/issues/107
The hashing of the featue set is wrong because it is hashing the
whole feature structure instead of just the feature string.
This results in the refcount and hash field becoming part of the
hash and the feature string not being completely hashed as the
bytes of the refcount and hash field are being counted in the
as part of the string length when the hash is taken.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/583
Reported-by: Samuele Pedroni <samuele.pedroni@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Currently features doesn't provide a way to query a features
value. So add an api to extract the value string of a feature.
The value string returned is a raw text value and may contain
leading spaces, etc that the caller may need to be aware of.
Signed-off-by: John Johansen <john.johansen@canonical.com>
PDEBUG is defined away when debug isn't configure in the build, this
hides the bad format string and argument.
Fix this and make sure we can still have the debug output that was
supposed to be printed.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/561
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
private.c: In function ‘_aa_is_blacklisted’:
private.c:140:35: warning: comparison of integer expressions of different signedness: ‘long int’ and ‘size_t’ {aka ‘long unsigned int’} [-Wsign-compare]
140 | found - name + suffix->len == name_len ) {
| ^~
private.c: In function ‘readdirfd’:
private.c:352:16: warning: comparison of integer expressions of different signedness: ‘size_t’ {aka ‘long unsigned int’} and ‘ssize_t’ {aka ‘long int’} [-Wsign-compare]
352 | for (i = 0; i < n; ) {
| ^
private.c:378:17: warning: comparison of integer expressions of different signedness: ‘size_t’ {aka ‘long unsigned int’} and ‘ssize_t’ {aka ‘long int’} [-Wsign-compare]
378 | for (i = 0; i < n; i++)
| ^
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/561
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
The len parameter returns a value that correlates to a getsockopt
parameter which is typed to socklen_t which is an unsigned int.
This technically changes the fn() api but old code using this is
already broken if the getsockopt parameter is large enough to overflow
the value.
In reality what is returned shouldn't ever be negative and the value
should never be large enough to trip the overflow. This is just
cleaning up a corner case.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/561 Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
kernel.c: In function ‘aa_getpeercon_raw’:
kernel.c:823:14: warning: comparison of integer expressions of different signedness: ‘socklen_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare]
823 | if (optlen < *len) {
| ^
kernel.c: In function ‘query_label’:
kernel.c:966:10: warning: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Wsign-compare]
966 | if (ret != size) {
| ^~
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/561 Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
```
libaalogparse.c: In function 'hex_to_string':
libaalogparse.c:144:16: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
144 | for (i = 0; i < len; i++) {
| ^
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/558
Acked-by: John Johansen <john.johansen@canonical.com>
Following up on !549, this patchset unifies most of the compiler warnings settings to use EXTRA_WARNINGS as newly defined in `common/Make.rules` and then adds the `-Wimplicit-fallthrough` compiler warning to the default set.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/551
Acked-by: John Johansen <john.johansen@canonical.com>
```
libaalogparse.c: In function 'hex_to_string':
libaalogparse.c:144:16: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
144 | for (i = 0; i < len; i++) {
| ^
```
`i` gets used/changed as counter variable in the for loop and only gets
increased (starting at 0), so making it an (unsigned) size_t should be
safe.
