As usual, we have 100% test coverage :-)
Those tests include all tests from test-ptrace_parse.py, therefore
delete this file.
Acked-by: John Johansen <john.johansen@canonical.com>
The tests in test-ptrace_parse.py used aa.parse_ptrace_rule(), which is
based on Raw_Ptrace_Rule (= regex check + "just store it").
This patch changes the tests to test against PtraceRule.get_clean().
Since get_clean does some cleanups, the expected result slightly differs
from the original rule.
Finally switch to the AATest class and setup_all_loops() we use in most
tests.
Also change test-regex_matches.py to import RE_PROFILE_SIGNAL directly
from apparmor.regex instead of apparmor.aa (where it will vanish soon).
Acked-by: John Johansen <john.johansen@canonical.com>
As a preparation for the PtraceRule class, add a <details> match group
to RE_PROFILE_PTRACE.
Also adjust test-regex_matches.py for the added group.
Note: RE_PROFILE_PTRACE is only used in aa.py, and only matches[0..2]
are used. 0 and 1 are audit and allow/deny and 2 is and stays the whole
rule (except audit and allow/deny). Therefore no aa.py changes are
needed.
Acked-by: John Johansen <john.johansen@canonical.com>
r2637 added support for parsing unix rules, but forgot to add write
support. The result was that a profile lost its unix rules when it was
saved.
This patch adds the write_unix_rules() and write_unix() functions (based
on the write_pivot_root() and write_pivot_root_rules() functions) and
makes sure they get called at the right place.
The cleanprof testcase gets an unix rule added to ensure it's not
deleted when writing the profile. (Note that minitools_test.py is not
part of the default "make check", however I always run it.)
References: https://bugs.launchpad.net/apparmor/+bug/1522938https://bugzilla.opensuse.org/show_bug.cgi?id=954104
Acked-by: Tyler Hicks <tyhicks@canonical.com> for trunk, 2.10 and 2.9.
This means:
- expect unicode (instead of str) when reading from a file in py2
- convert keys() result to a set to avoid test failures because of
dict_keys type
After this change, all tests work for both py2 and py3.
Acked-by: Tyler Hicks <tyhicks@canonical.com> for trunk and 2.10.
python 3 uses only the 'str' type, while python 2 also uses 'unicode'.
This patch adds a type_is_str() function to common.py - depending on the
python version, it checks for both. This helper function is used to keep
the complexity outside of the rule classes.
The rule classes get adjusted to use type_is_str() instead of checking
for type(x) == str, which means they support both python versions.
As pointed out by Tyler, there are also some type(...) == str checks in
aare.py and rule/__init__.py which should get the same change.
Finally, add test-common.py with some tests for type_is_str().
References: https://bugs.launchpad.net/apparmor/+bug/1513880
Acked-by: Tyler Hicks <tyhicks@canonical.com> for trunk and 2.10
Note: 2.10 doesn't contain SignalRule, therefore it doesn't get that
part of the patch.
Parsing variables was broken in several ways:
- empty quotes (representing an intentionally empty value) were lost,
causing parser failures
- items consisting of only one letter were lost due to a bug in RE_VARS
- RE_VARS didn't start with ^, which means leading garbage (= syntax
errors) was ignored
- trailing garbage was also ignored
This patch fixes those issues in separate_vars() and changes
var_transform() to write out empty quotes (instead of nothing) for empty
values.
Also add some tests for separate_vars() with empty quotes and adjust
several tests with invalid syntax to expect an AppArmorException.
var_transform() gets some tests added.
Finally, remove 3 testcases from the "fails to raise an exception" list
in test-parser-simple-tests.py.
Acked-by: John Johansen <john.johansen@canonical.com> for trunk and 2.9
(which also implies 2.10)
Note: 2.9 doesn't have test-parser-simple-tests.py, therefore it won't
get that part of the patch.
Also adjust test-signal.py for AARE (it needs a change in _compare_obj())
and enable the regex-based tests.
Acked-by: John Johansen <john.johansen@canonical.com>
The AARE class is meant to handle the internals of path AppArmor regexes
at various places / rule types (filename, signal peer etc.). The goal is
to use it in rule classes to hide all regex magic, so that the rule
class can just use the match() method.
If log_event is given (which means handing over a raw path, not a regex),
the given path is converted to a regex in convert_expression_to_aare().
(Also, the raw path is used in match().)
BTW: The reason for delaying re.compile to match() is performance - I'd
guess a logprof run calls match() only for profiles with existing log
events, so we can save 90% of the re.compile() calls.
The patch also includes several tests.
Acked-by: John Johansen <john.johansen@canonical.com>
In detail, this means:
- handle signal events in logparser.py
- "translate" those events in aa.py - from log (logparser.py readlog())
to prelog (handle_children()) to log_dict (collapse_log()) to
log_obj (ask_the_questions())
(yes, really! :-/ - needless to say that this is ugly...)
- finally ask the user about the signal in ask_the_questions()
Also add a logparser test to test-signal.py to ensure the logparser step
works as expected.
Note that the aa.py changes are not covered by tests, however they
worked in a manual test.
Acked-by: John Johansen <john.johansen@canonical.com>
As Kshitij mentioned, abstract methods should use NotImplementedError
instead of AppArmorBug.
While changing this, I noticed that __repr__() needs to be robust against
NotImplementedError because get_raw() is not available in BaseRule.
Therefore the patch changes __repr__() to catch NotImplementedError.
Of course the change to NotImplementedError also needs several
adjustments in the tests.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
(long before branching off 2.10, therefore I'll also commit to 2.10)
It's pointless to keep a separate file for those tests - they integrate
well in test-signal.py.
After the move, test-signal_parse.py is empty and will be deleted.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
This means:
- import the classes instead of RE_PROFILE_SIGNAL
- simplify signal rule parsing a lot
- drop the (now unused) functions parse_signal_rule() and write_signal_rules()
- change write_signal() to use the SignalRuleset class
Also drop the now unused Raw_Signal_Rule from rules.py.
Finally, drop most parser signal tests from the "known wrong results"
blacklist in test-parser-simple-tests.py because those tests succeed
with SignalRule.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
The tests in test-signal_parse.py used aa.parse_signal_rule(), which is
based on Raw_Signal_Rule (= regex check + "just store it").
This patch changes the tests to test against SignalRule.get_clean().
Since get_clean() does some cleanups, the expected result slightly
differs from the original rule.
Finally switch to the AATest class and setup_all_loops() we use in most
tests.
Also change test-regex_matches.py to import RE_PROFILE_SIGNAL directly
from apparmor.regex instead of apparmor.aa (where it will vanish soon).
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
Those classes will be used to parse and handle signal rules.
They understand the (surprisingly complex) syntax of signal rules.
Note that get_clean() doesn't output superfluos things, so
signal ( send ) set = ( int ),
will become
signal send set=int,
Also add a set of tests (100% coverage :-) to make sure everything works
as expected.
This is a merged commit of the following patches:
- 07-add-SignalRule-and-SignalRuleset.diff
- 13-test-signal-compare_obj.diff
- 17-signal-rule-cleanup.diff
- 21-test-signal-rename-tests.diff
- 22-signal-rule-adjustments.diff
- 24-signal-rule-fix-error-message.diff
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
(all patches in this commit)
As a preparation for the SignalRule class, add a <details> match group
to RE_PROFILE_SIGNAL.
Also adjust test-regex_matches.py for the added group.
Note: RE_PROFILE_SIGNAL is only used in aa.py, and only matches[0..2]
are used. 0 and 1 are audit and allow/deny and 2 is and stays the whole
rule (except audit and allow/deny). Therefore no aa.py changes are
needed.
Acked-by: John Johansen <john.johansen@canonical.com> for trunk and 2.10
The last utils/test/Makefile change switched to using the in-tree
libapparmor by default (unless USE_SYSTEM=1 is given). However, I missed
to add the swig/python parts of libapparmor to PYTHONPATH, so the
system-wide LibAppArmor/__init__.py was always used.
This patch adds the in-tree libapparmor python module to PYTHONPATH.
I'm sorry for the interesting[tm] way to find out that path, but
a) I don't know a better / less ugly way and
b) a similar monster already works in libapparmor/swig/python/test/ ;-)
Acked-by: John Johansen <john.johansen@canonical.com> for 2.9 and trunk
(that also implies 2.10 ;-)
This makes print()ing a class object much more helpful - instead of
<apparmor.rule.network.NetworkRule object at 0x7f416b239e48>
we now get something like
<NetworkRule> network inet stream,
(based on get_raw())
A NetworkRuleset will be printed as (also based on get_raw())
<NetworkRuleset>
network inet stream,
allow network inet stream, # comment
</NetworkRuleset>
Also add tests to test-network.py to ensure that __repr__() works as
expected.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
If a script contains a hashbang like
#! /usr/bin/perl -w
aa-autodep created a profile entry like
"/usr/bin/perl -w" ix,
which is obviously incorrect.
This patch fixes this (by using only the first part of the hashbang line)
and also adds some tests for it.
References: https://bugs.launchpad.net/apparmor/+bug/1505775
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
Bug: https://launchpad.net/bugs/1393979
Both create_new_profile() and handle_children() check if the given exec
target is a script and add permissions for the interpreter and a
matching abstraction.
This patch merges that into the get_interpreter_and_abstraction()
function and changes create_new_profile() and handle_children() to use
this function.
A nice side effect is that handle_children() now knows more abstractions
(its original list was incomplete).
The behaviour of create_new_profile() doesn't change.
Also add tests for get_interpreter_and_abstraction() to make sure it
does what we expect.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
Bug: https://launchpad.net/bugs/1505775
These tests ensure that create_new_profile() sets the expected basic
permissions for scripts and non-script files.
Acked-by: John Johansen <john.johansen@canonical.com>
Also add support for the USE_SYSTEM variable, which means:
- test against the in-tree libapparmor and python modules by default
- test against the system libapparmor and python modules if USE_SYSTEM
is set
The old behaviour was a mix of both - it always used the in-tree python
modules and the system libapparmor.
For obvious reasons, you'll need to build libapparmor before running the
tests (unless you specify USE_SYSTEM=1 as parameter to make check).
Acked-by: John Johansen <john.johansen@canonical.com> for trunk and 2.9
Add a testcase that parses all tests in the parser/tst/simple_tests/
directory with parse_profile_data() to ensure that everything with valid
syntax is accepted, and that all tests marked as FAIL raise an
exception.
This already resulted in
- several patches to fix low-hanging fruits (including some bugs in the
parser simple_tests itsself)
- a list of tests that don't behave as expected. Those files get their
expected result reverted to make sure we notice any change in the
tools behaviour, especially changing to the really expected resulted.
This method also makes sure that the testcase doesn't report any of
the known failures.
- a 5% improvement in test coverage - mostly caused by nearly completely
covering parse_profile_data.
- addition of some missing testcased (as noticed by missing coverage),
for example several "rule outside of a profile" testcases.
As indicated above, the tools don't work as expected on all test
profiles - most of the failures happen on expected-to-fail tests that
pass parse_profile_data() without raising an exception. There are also
some tests failing despite valid syntax, often with rarely used syntax
like if conditions and qualifier blocks.
Most of the failing (generated) tests are caused by features not
implemented in the tools yet:
- validating dbus rules (currently we just store them without any parsing)
- checks for conflicting x permissions
- permissions before path ("r /foo,")
- 'safe' and 'unsafe' keywords for *x rules
- 'Pux' and 'Cux' permissions (which actually mean PUx and CUx, and get
rejected by the tools - ideally the generator script should create
PUx and CUx tests instead)
skip_startswith excludes several generated tests from being run. I know
that skip_startswith also excludes tests that would not fail, but the
generated filenames (especially generated_x/exact-*) don't have a
pattern that I could easily use to exclude less tests - and I'm not too
keen to add a list with 1000 single filenames ;-)
Acked-by: John Johansen <john.johansen@canonical.com>
With this addition, all globbing styles (as documented in apparmor.d(5))
are covered in the convert_regexp() tests.
Acked-by: Seth Arnold <seth.arnold@canonical.com>
The tests for convert_regexp() were hidden in common_test.py, where they
were never executed.
This patch moves them to the new file test-aare.py and also converts the
regex_tests.ini to a tests[] array to have the test data inside the test
file. (All tests from regex_tests.ini are in test-aare.py, and two tests
with prepended and appended path segments were added.)
Also add some tests that check the raw behaviour of convert_regexp() -
the tests "by example" are probably more useful and for sure more
readable ;-) but I want to have some examples of the converted regexes
available.
Acked-by <timeout>
logparser.py does a regex check on log lines as performance improvement
so that it only hands over lines that look like AppArmor events to
LibAppArmor parsing. Those regexes were incomplete and didn't cover all
log formats LibAppArmor accepts, with the end result of "overlooking"
events.
This patch splits off common parts of the regex, adds more regexes for
several log types and finally merges everything into one regex.
test-libapparmor-test_multi.py now also checks all test_multi log lines
against the regex to ensure logparser.py doesn't silently ignore events.
test-logparser.py gets adjusted to the merged RE_LOG_ALL regex.
Finally, add a new test that was posted on IRC to the test_multi set.
As already threatened nearly a month ago,
Acked by <timeout> for trunk and 2.9
This testcase will parse all libraries/libapparmor/testsuite/test_multi
tests and compare the result with the *.out files.
It also include a "ToDo list" of keywords that are not yet supported in
the python code - those are typically related to rule types not
supported in the tools yet (dbus, signal etc.).
An interesting special case are exec events with network details:
testcase01.in, testcase12.in, testcase13.in
which might be hand-made, invalid logs, but nobody remembers ;-)
Acked-by <timeout>
Profile name and attachment can contain variables, so the
RE_PROFILE_START regex should accept it.
(Note: the variable content isn't checked.)
Also add some tests with variables.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
- allow only a specific set of time units
- optionally allow whitespace between rlimit value and unit
- move check for invalid time units to time_to_int()
Also update the tests:
- add several tests with whitespace between value and unit
- change a test that used the (now invalid) "1m" to "1min"
- change the time_to_int() tests to use 'us' as default unit, and add
a test with 'seconds' as default unit
Acked-by: Steve Beattie <steve@nxnw.org>
Thanks to a bug in the apparmor.d manpage, NetworkRule rejected rules
that contained only TYPE (for example "network stream,"). A bugreport on
IRC and some testing with the parser showed that this is actually
allowed, so NetworkRule should of course allow it.
Note: not strip()ing rule_details is the easiest way to ensure we have
whitespace in front of the TYPE in TYPE-only rules, which is needed by
the RE_NETWORK_DETAILS regex.
Also adjust the tests to the correct behaviour.
Acked-by: Steve Beattie <steve@nxnw.org>
RlimitRule accidently used 'ms' (milliseconds) as default unit for
rttime rules, but rttime without unit means 'us' (microseconds). This
patch fixes this.
Also add some tests with 'us' as unit, and two more to cover terribly
invalid corner cases (and to improve test coverage by 2 lines ;-)
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve@nxnw.org>
Change minitools tests to use AATest and work inside a tmpdir.
This results in lots of changes ('./profiles' -> self.profile_dir,
local_profilename -> self.local_profilename etc.) and also moves some
code from the global area to AASetup().
Also drop the no longer needed clean_profile_dir() and add linebreaks
in assert* calls with a long error message specified.
Acked-by: Steve Beattie <steve@nxnw.org>
The function is basically a wrapper around a regex, so regex.py is a
much better home.
While on it, rename the regex to RE_INCLUDE, change it to named matches,
use RE_EOL to handle comments and compile it outside the function, which
should result in a (small) performance improvement.
Also rewrite re_match_include(), let it check for empty include
filenames ("#include <>") and let it raise AppArmorException in that
case.
Finally, adjust code calling it to the new location, and add some tests
for re_match_include()
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
Change hat declarations ("^hat,") are no longer supported (see previous
patch for details). Therefore remove support for writing them.
This also means to completely remove the 'declared' flag, which was only
needed for hat declarations, and was (after the previous patch) always
set to False.
Also add a hat to the cleanprof_test.{in,out} test profile to make sure
aa-cleanprof doesn't break hats, and a hat declaration with the same
name to make sure it gets removed and doesn't break the "real" hat.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
After switching to winbindd as test profile, comments about the ntpd
profile don't make sense anymore ;-)
The patch also includes some whitespace fixes.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
Acked-by: Steve Beattie <steve@nxnw.org>
This time we only have 98% coverage (some missing and partial) because
I didn't find corner cases that raise some exceptions ;-)
Acked-by: Steve Beattie <steve@nxnw.org>
Change minitools_test.py to use the winbind instead of the ntpd profile
for testing. The tests broke because the ntpd profile has the
attach_disconnected flag set now, and therefore didn't match the
expected flags anymore.
Also replace the usage of filecmp.cmp() in the cleanprof test with
reading the file and using assertEqual - this has the advantage that we
get a full diff instead of just "files differ".
Note: The aa-cleanprof test is still failing because of a bug in
tools.py, but will be fixed by the next patch.
See https://bugs.launchpad.net/apparmor/+bug/1416346 for details.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
This allows to run minitools_test.py as non-root user.
Also add a check that only creates the force-complain directory if it
doesn't exist yet.
Note: With this patch applied, there are still 4 failing tests, probably
caused by changes in the profiles that are used in the tests.
Acked-by: Kshitij Gupta <kgupta8592@gmail.com>
The function will return the 'Exec Condition' and the 'Target Profile'
as nice list to use in aa-logprof (once we have support for
change_profile in logparser.py) and aa-mergeprof.
Also add some tests to ensure the correct result.
Acked-by: Steve Beattie <steve@nxnw.org>
BaseRule:
- add logprof_header() - sets the 'Qualifier' (audit, allow/deny) header
if a qualifier is specified, calls logprof_header_localvars() and then
returns an array of headers to display in aa-logprof and aa-mergeprof
- add logprof_header_localvars() - dummy function that needs to be
implemented in the child classes
NetworkRule: add logprof_header_localvars() - adds 'Network Family'
and 'Socket Type' to the headers
CapabilityRule: add logprof_header_localvars() - adds 'Capability' to
the headers
Also change aa-mergeprof to use rule_obj.logprof_header() for network
and capability rules. This means deleting lots of lines (that moved to
the *Rule classes) and also deleting the last differences between
capabiltiy and network rules.
Finally add tests for the newly added functions.
Acked-by: Steve Beattie <steve@nxnw.org>
Also implement handling for the special capability value '__ALL__' in
severity.py, which is used for 'capability,' rules (aa-mergeprof might
need to display the severity for such a rule).
Finally, add some tests for severity() in test-capability.py and a test
for '__ALL__' in test-severity.py.
Acked-by: Steve Beattie <steve@nxnw.org>
severity() will, surprise!, return the severity of a rule, or
sev_db.NOT_IMPLEMENTED if a *Rule class doesn't implement the severity()
function.
Also add the NOT_IMPLEMENTED constant to severity.py, and a test to
test-baserule.py that checks the return value in BaseRule.
Acked-by: Steve Beattie <steve@nxnw.org>
I decided to use a "small" solution for now, which basically means
s/unittest.TestCase/AATest/, cleanup of some setUp() and renaming the
remaining setUp() functions to AASetup().
This doesn't mean an instant win (like in test-severity.py), but allows
to add tests with a tests[] array.
Acked-by: Steve Beattie <steve@nxnw.org>
To be able to distinguish between severity 10 and unknown severity,
change AASetup to specify 'unknown' as default rank, and change the
expected result to 'unknown' where it's expected.
Also change the "expected rank %d" to "%s" because it can be a string
now, and add a test that contains directories with different severity
in one variable.
After these changes, handle_variable_rank() errors out with
TypeError: unorderable types: str() > int()
so fix it by
- initializing rank with the default rank (instead of none)
- explicitely check that rank and rank_new are != the default rank before
doing a comparison
A side effect is another bugfix - '@{HOME}/sys/@{PROC}/overcommit_memory'
is severity 4, not 10 or unknown (confirmed by reading severity.db).
Acked-by: Steve Beattie <steve@nxnw.org>
This simplifies test-severity.py a lot:
- lots of test functions are replaced with tests[] arrays
- tempdir handling and cleanup is now done automagically
Even if test-severity.py shrunk by 65 lines, all tests are still there.
There's even an addition - SeverityTestCap now additionally verifies the
result of rank_capability().
Acked-by: Steve Beattie <steve@nxnw.org>
Add a check to parse_profile_data() to detect if a file contains two
profiles with the same name.
Note: Two profiles with the same name, but in different files, won't be
detected by this check.
Also add basic tests to ensure that a valid profile gets parsed, and two
profiles with the same name inside the same file raise an exception.
(Sidenote: these simple tests improve aa.py coverage from 9% to 12%,
which also confirms the function is too long ;-)
Acked-by: Steve Beattie <steve@nxnw.org>
