There are some tests like attach_disconnected and posix_mq that can
have a program that calls another. For example, posix_mq_rcv calls
posix_mq_snd. Both of them write to the same output file, but the code
that checks the result expects only one line. This change enables
checking multiple lines in the output file and passing or failing
accordingly.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The move_mount tests were returning -1 in case of failure causing it
to become 255 in some systems, but checktestbg in the testsuite
considers any return value greater than 128 to be a signal error.
That would cause tests that should fail to display the following test
error:
... was expected to 'fail'. Reason for failure 'killed by
signal 127'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
the stacking tests need to be able to read and write the new apparmor
dir in proc, if that interface has been selected. Update the tests to
make sure they have the permissions needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
upstream kernels only have network_v8 unfortunately the tcp tests were
only being run against kernels that had network (which is v7). Kernels
that support both (Ubuntu) would be tested against v8, so v8 has been
tested but pure upstream kernels were failing to be tested correctly.
This patch will only make sure one of the supported versions are
tested. This is determined by the parser which prefers v8. In the
future the tests need to be extended to run the tests against all
kernel supported versions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Merge request https://gitlab.com/apparmor/apparmor/merge_requests/1084
makes it so attach_disconnected.path implies attach_disconnected, so
remove superfluous flag from tests.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The test to check if the kernel supports a feature covers two cases:
1. The file/directory indicates a feature is supported.
2. The feature is supported if it's in the contents of the file.
When the intended check is for case 1, and the file does not exist,
then the code checks if it's case 2, but since it was not supposed to
be, we end up grepping a directory, causing an error message. Fix this
by checking if we're grepping a file.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Compiling of io_uring tests fail if liburing-dev is not installed.
Also, the tests were not running as part of the test suite.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1067
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Compiling of io_uring tests fail if liburing-dev is not installed.
Also, the tests were not running as part of the test suite.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
In MR #1063 the tests/regression/apparmor/syscall.sh script was updated to
account for kernel lockdown, but the capabilities.sh script also exercises these
system calls so this also needs to be updated as well.
Also required to fix issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
When kernel lockdown is enabled the ioperm and iopl tests will fail regardless
since lockdown prevents these syscalls before AppArmor has a chance to mediate
them. So workaround this by detecting when lockdown is enabled and expect the
tests to fail in that case.
Fixes issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Closes#226
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1063
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When kernel lockdown is enabled the ioperm and iopl tests will fail regardless
since lockdown prevents these syscalls before AppArmor has a chance to mediate
them. So workaround this by detecting when lockdown is enabled and expect the
tests to fail in that case.
Fixes issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1048
made it so rules like
mount slave /snap/bin/** -> /**,
mount /snap/bin/** -> /**,
would get passed into change_mount_type rule generation when they
shouldn't have been. This would result in two different errors.
1. If kernel mount flags were present on the rule. The error would
be caught causing an error to be returned, causing profile compilation
to fail.
2. If the rule did not contain explicit flags then rule would generate
change_mount_type permissions based on souly the mount point. And
the implied set of flags. However this is incorrect as it should
not generate change_mount permissions for this type of rule. Not
only does it ignore the source/device type condition but it
generates permissions that were never intended.
When used in combination with a deny prefix this overly broad
rule can result in almost all mount rules being denied, as the
denial takes priority over the allow mount rules.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2023814
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1211989
Fixes: 9d3f8c6cc ("parser: fix parsing of source as mount point for propagation type flags")
Fixes: MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1048
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1054
Signed-off-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit 86d193e183)
Signed-off-by: John Johansen <john.johansen@canonical.com>
Before 300889c3a, mount rules would compile policy when using source
as mount point for rules that contain propagation type flags, such as
unbindable, runbindable, private, rprivate, slave, rslave, shared, and
rshared. Even though it compiled, the rule generated would not work as
expected.
This commit fixes both issues. It allows the usage of source as mount
point for the specified flags, albeit with a deprecation warning, and
it correctly generates the mount rule.
The policy fails to load when both source and mount point are
specified, keeping the original behavior (reference
parser/tst/simple_tests/mount/bad_opt_10.sd for example).
Fixes: https://bugs.launchpad.net/bugs/1648245
Fixes: https://bugs.launchpad.net/bugs/2023025
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The mount options MS_LAZYTIME and MS_NOSYMFOLLOW were added in
kernels 4.0 and 5.10, respectively. Update the mount test script
and helper to skip testing those options if they are not available.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
The unix network tests are not being run on a v8 network capable kernel. Under v8 there needs to be some adjustments to the tests because unix rules get downgraded to the socket rule ```network unix,``` which does not have the same set of conditionals or fine grained permissions, meaning some tests that would fail under af_unix (like missing permission tests) will pass under v8 network rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/893
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
When the replacement regex for multiple qualifiers matches, the
capture group variables ($1, $2, etc) are overwritten to match the
most recent regex. Since there are no capture groups in the 's/,/ /g'
regex, then $2 was empty, causing an error on policy generation.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
dbus 1.14.4 changed the behavior of unix:tmpdir to be equivalent to
unix:dir, which cases dbus-daemon to generate path based sockets,
instead of the previous abstract sockets. [1]
In this change we force dbus-daemon to generate an abstract socket by
specifying the abstract socket address in the command.
[1] https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.14/NEWS#L64
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The mqueue tests were using the previous format which was specific for
capabilities. The qual= prefix should be used instead.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
dbus-broker requires some modification of the test suite. In summary:
* refactor to support starting and stopping both dbus and dbus-broker.
* Make it so we can run the tests on each, where appropriate
* skip unrequested reply and eavesdrop tests for dbus broker because they are not supported.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/965
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
DBus Broker was enabled for the dbus_message and dbus_service
regression tests.
The dbus_eavesdropping test does not run with dbus-broker because
eavesdropping was deprecated in favor or monitoring, so new tests for
the "BecomeMonitor" method need to be added.
The dbus_unrequested_reply test is also not supported by dbus-broker,
therefore the tests are skipped.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Commit 8cf3534a5 ("tests regression: fix failure on older versions of
Make") from https://gitlab.com/apparmor/apparmor/-/merge_requests/639
was incorrectly applied, including the `+` prefixes from the proposed
patch. This causes the sysctl syscall() checks to not correctly be
applied and results in a mismatch of expectations in the
syscall_sysctl.sh test script, causing it and the testsuite to fail.
Thus, remove the bogon `+` characters from the Makefile, to make
USE_SYSCTL be set correctly.
Fixes: 8cf3534a5 ("tests regression: fix failure on older versions of Make")
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/963
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The test "eavesdrop (confined w/o dbus perms)" was failing for the
wrong reason. While it should fail because it is missing dbus rules, it
was actually failing because it didn't have the required unix rule.
The error message was:
"FAIL: Failed to open connection to "session" message bus: Failed to open socket: Permission denied"
Corresponding audit log:
[28306.743863] audit: type=1400 audit(1671048091.505:297): apparmor="DENIED" operation="create" class="net" profile="/home/georgia/apparmor/tests/regression/apparmor/dbus_eavesdrop" pid=6787 comm="dbus_eavesdrop" family="unix" sock_type="stream" protocol=0 requested_mask="create" denied_mask="create" addr=none
After the change, the error message is:
FAIL: Failed to open connection to "session" message bus: An AppArmor policy prevents this sender from sending this message to this recipient; type="method_call", sender="(null)" (inactive) interface="org.freedesktop.DBus" member="Hello" error name="(unset)" requested_reply="0" destination="org.freedesktop.DBus" (bus)
Corresponding audit log:
[28444.248268] audit: type=1107 audit(1671048229.009:300): pid=6826 uid=0 auid=1000 ses=5 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="session" path="/org/freedesktop/DBus" interface="org.freedesktop.DBus" member="Hello" mask="send" name="org.freedesktop.DBus" pid=6854 label="/home/georgia/apparmor/tests/regression/apparmor/dbus_eavesdrop" peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=0 hostname=? addr=? terminal=?'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The profile generated by dbus did not include this rule
which caused the following DENIED audit logs:
[26937.013475] audit: type=1400 audit(1671046721.776:246): apparmor="DENIED" operation="getattr" class="file" profile="/home/georgia/apparmor/tests/regression/apparmor/dbus_message" name="/tmp/sdtest.5720-14413-VQMPsH/output.dbus_message" pid=5866 comm="dbus_message" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Commit 8cf3534a5 ("tests regression: fix failure on older versions of
Make") from https://gitlab.com/apparmor/apparmor/-/merge_requests/639
was incorrectly applied, including the `+` prefixes from the proposed
patch. This causes the sysctl syscall() checks to not correctly be
applied and results in a mismatch of expectations in the
syscall_sysctl.sh test script, causing it and the testsuite to fail.
Thus, remove the bogon `+` characters from the Makefile, to make
USE_SYSCTL be set correctly.
Fixes: 8cf3534a5 ("tests regression: fix failure on older versions of Make")
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
getopt returns an int, not a char.
Error caused by this issue could only be observed on non-x86 systems.
Closes LP#2000359
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Setns is used to associate to an existing user namespace, so the
kernel security hook for user namespace creation is not called.
The restriction for setns is that it should have the capability
sys_admin.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This allows regression tests to generate profiles that use rule qualifiers,
such as allow, deny, and audit. Qualifiers can be specified for a rule by
prepending 'qual=', followed by a comma-separated list of rule qualifiers,
then a ':', then the rule itself.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
The test kernel_features only checked if the feature file exists, but
there are cases when we need to check if the feature is part of the
file's content. For example, we might want to check if a mode is present
in the feature "mask" file.
This is already supported by libapparmor's aa_features_supports.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Print out a summary of the tests that passed and failed at the end of the
regression tests. Merge the tests and alltests make targets since they
only differ in which tests are run.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/942
Approved-by: Steve Beattie <gitlab@nxnw.org>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Print out a summary of the tests that passed and failed at the end of the
regression tests. Merge the tests and alltests make targets since they
only differ in which tests are run.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
This update to the regression test framework allows a test script to
execute a test binary as a different user by passing '-u <username>'
to the settest function.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
