# This publication is intellectual property of Canonical Ltd. Its contents
# can be duplicated, either in part or in whole, provided that a copyright
# label is visibly located on each copy.
#
# All information found in this book has been compiled with utmost
# attention to detail. However, this does not guarantee complete accuracy.
# Neither Canonical Ltd, the authors, nor the translators shall be held
# liable for possible errors or the consequences thereof.
#
# Many of the software and hardware descriptions cited in this book
# are registered trademarks. All trade names are subject to copyright
# restrictions and may be registered trade marks. Canonical Ltd.
# essentially adhere to the manufacturer's spelling.
#
# Names of products and trademarks appearing in this book (with or without
# specific notation) are likewise subject to trademark and trade protection
# laws and may thus fall under copyright restrictions.
#


=pod

=head1 NAME

aa_policy_cache - an opaque object representing an AppArmor policy cache

aa_policy_cache_new - create a new aa_policy_cache object from a path

aa_policy_cache_ref - increments the ref count of an aa_policy_cache object

aa_policy_cache_unref - decrements the ref count and frees the aa_policy_cache object when 0

aa_policy_cache_remove - removes all policy cache files under a path

aa_policy_cache_replace_all - performs a kernel policy replacement of all cached policies

aa_policy_cache_dir_path - returns the path to the aa_policy_cache directory

aa_policy_cache_dir_path_preview - returns a preview of the path to the aa_policy_cache directory without an existing aa_policy_cache object

=head1 SYNOPSIS

B<#include E<lt>sys/apparmor.hE<gt>>

B<typedef struct aa_policy_cache aa_policy_cache;>

B<int aa_policy_cache_new(aa_policy_cache **policy_cache, aa_features *kernel_features, int dirfd, const char *path, uint16_t max_caches);>

B<int aa_policy_cache_add_ro_dir(aa_policy_cache *policy_cache, int dirfd, const char *path);>

B<aa_policy_cache *aa_policy_cache_ref(aa_policy_cache *policy_cache);>

B<void aa_policy_cache_unref(aa_policy_cache *policy_cache);>

B<int aa_policy_cache_remove(int dirfd, const char *path);>

B<int aa_policy_cache_replace_all(aa_policy_cache *policy_cache, aa_kernel_interface *kernel_interface);>

B<char *aa_policy_cache_dir_path(aa_policy_cache *policy_cache, int level);>

B<char *aa_policy_cache_dir_path_preview(aa_features *kernel_features, int dirfd, const char *path);>

Link with B<-lapparmor> when compiling.

=head1 DESCRIPTION

The I<aa_policy_cache> object contains information about a set of AppArmor
policy cache files. The policy cache files are the binary representation of a
human-readable AppArmor profile. The binary representation is the form that is
loaded into the kernel.

The aa_policy_cache_new() function creates an I<aa_policy_cache>
object based upon a directory file descriptor and path. See the
openat(2) man page for examples of I<dirfd> and I<path>. The I<path>
must point to a directory and it will be used as the basis for the
location of policy cache files. See I<aa_policy_cache_dir_path> to
find out which directory will be used to store the binary policy cache
files. If additional overlay cache directories are used (see
I<aa_policy_cache_add_ro_dir>) the directory specified in
I<aa_policy_cache_new> is the first directory searched and is the
writable overlay. If I<kernel_features> is NULL, then the features of
the current kernel are used. When specifying a valid
I<kernel_features> object, it must be compatible with the features
of the kernel of interest.  The value of I<max_caches> should be equal
to the number of caches that should be allowed before old caches are
automatically reaped. The definition of what is considered to be an
old cache is private to libapparmor. Specifying 0 means that no new
caches should be created and only existing, valid caches may be used.
Specifying UINT16_MAX means that a new cache may be created and that
the reaping of old caches is disabled. The allocated
I<aa_policy_cache> object must be freed using aa_policy_cache_unref().

The aa_policy_cache_add_ro_dir() function adds an existing cache directory
to the policy cache, as a readonly layer under the primary directory
the cache was created with. When the cache is searched for an existing
cache file the primary directory will be searched and then the readonly
directories in the order that they were added to the policy cache.
This allows the policy cache to be seeded with precompiled policy
that can be updated by overlaying the read only cache file with one
written to the primary cache dir.

aa_policy_cache_ref() increments the reference count on the I<policy_cache>
object.

aa_policy_cache_unref() decrements the reference count on the I<policy_cache>
object and releases all corresponding resources when the reference count
reaches zero.

The aa_policy_cache_remove() function deletes all of the policy cache files
based upon a directory file descriptor and path. The I<path> must point to a 
directory. See the openat(2) man page for examples of I<dirfd> and I<path>.

The aa_policy_cache_replace_all() function can be used to perform a policy
replacement of all of the cache policies in the cache directory represented by
the I<policy_cache> object. If I<kernel_interface> is NULL, then the current
kernel interface is used. When specifying a valid I<kernel_interface> object,
it must be the interface of the currently running kernel.

The aa_policy_cache_dir_path() function provides the path to the cache
directory for a I<policy_cache> object at I<level> in the policy cache
overlay of cache directories. A I<level> of 0 will always be present
and is the first directory to search in an overlay of cache
directories, and will also be the writable cache directory
layer. Binary policy cache files will be located in the directory
returned by this function.

The aa_policy_cache_dir_levels() function provides access to the number
of directories that are being overlayed to create the policy cache.


=head1 RETURN VALUE

The aa_policy_cache_new() function returns 0 on success and I<*policy_cache>
will point to an I<aa_policy_cache> object that must be freed by
aa_policy_cache_unref(). -1 is returned on error, with errno set appropriately,
and I<*policy_cache> will be set to NULL.

aa_policy_cache_ref() returns the value of I<policy_cache>.

aa_policy_cache_remove() and aa_policy_cache_replace_all() return 0 on success.
-1 is returned on error, with errno set appropriately.

aa_policy_cache_dir_path() returns a path string which must be freed by the
caller. NULL is returned on error, with errno set appropriately.

aa_policy_cache_dir_levels() returns a number indicating the number of
directory levels there are associated with the I<policy_cache>.

aa_policy_cache_dir_path_preview() is the same as
aa_policy_cache_dir_path() except that it doesn't require an existing
I<aa_policy_cache> object. This is useful if the calling program cannot
create an I<aa_policy_cache> object due to lack of privileges needed to
create the cache directory.

=head1 ERRORS

The errno value will be set according to the underlying error in the
I<aa_policy_cache> family of functions that return -1 or NULL on error.

=head1 NOTES

All aa_policy_cache functions described above, except for the
aa_policy_cache_dir_path() function was added in libapparmor version
2.13. All the other aa_policy_cache functions described above are
present in libapparmor version 2.10.

aa_policy_cache_unref() saves the value of errno when called and restores errno
before exiting in libapparmor version 2.12 and newer.

=head1 BUGS

None known. If you find any, please report them at
L<https://gitlab.com/apparmor/apparmor/-/issues>.

=head1 SEE ALSO

aa_features(3), aa_kernel_interface(3), openat(2) and
L<https://wiki.apparmor.net>.

=cut