Add man pages

CMakeLists.txt

@@ -43,3 +43,29 @@ INSTALL(
     FILES ${PROJECT_SOURCE_DIR}/config
     DESTINATION /etc/sway/
 )
+
+ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.1
+  COMMAND a2x --no-xmllint --doctype manpage --format manpage
+    -D ${CMAKE_RUNTIME_OUTPUT_DIRECTORY} ${CMAKE_CURRENT_SOURCE_DIR}/sway.1.txt 
+  DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/sway.1.txt
+)
+
+ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.5
+  COMMAND a2x --no-xmllint --doctype manpage --format manpage
+    -D ${CMAKE_RUNTIME_OUTPUT_DIRECTORY} ${CMAKE_CURRENT_SOURCE_DIR}/sway.5.txt 
+  DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/sway.5.txt
+)
+
+ADD_CUSTOM_TARGET(man ALL
+  DEPENDS ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.1
+  DEPENDS ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.5)
+
+INSTALL(
+  FILES ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.1
+  DESTINATION ${CMAKE_INSTALL_PREFIX}/man/man1
+)
+
+INSTALL(
+  FILES ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/sway.5
+  DESTINATION ${CMAKE_INSTALL_PREFIX}/man/man5
+)

sway.1.txt

@@ -0,0 +1,82 @@
+/////
+vim:set ts=4 sw=4 tw=82 noet:
+/////
+sway (1)
+========
+
+Name
+----
+sway - SirCmpwn's Wayland window manager
+
+Synopsis
+--------
+'sway' [options] [command]
+
+Options
+-------
+
+*-c, \--config* <config>::
+	Specifies a config file.
+
+*-C, \--validate*::
+	Check the validity of the config file, then exit.
+
+*-d, --debug*::
+	Enables full logging, including debug information.
+
+*-v, \--version*::
+	Show the version number and quit.
+
+*-V, --verbose*::
+	Enables more verbose logging.
+
+*--get-socketpath*::
+	Gets the IPC socket path and prints it, then exits.
+
+Description
+-----------
+
+sway was created to fill the need of an i3-like window manager for Wayland. The
+upstream i3 developers have no intention of porting i3 to Wayland, and projects
+proposed by others ended up as vaporware. Many thanks to the i3 folks for
+providing such a great piece of software, so good that your users would rather
+write an entirely new window manager from scratch that behaved _exactly_ like i3
+rather than switch to something else.
+
+You may run sway from an ongoing x11 session to run it within x. Otherwise, you
+can run sway on a tty and it will use your outputs directly.
+
+*Important note for nvidia users*: The proprietary nvidia driver does _not_ have
+support for Wayland as of 2015-08-17. Use nouveau.
+
+Commands
+--------
+
+If sway is currently running, you may run _sway [command]_ to send _command_ to
+the running instance of sway. The same commands you would use in the config file
+are valid here (see **sway**(5)). For compatability reasons, you may also issue
+commands with **sway-msg**(1) or **i3-msg**(1) (or even with **i3**(1), probably).
+
+Configuration
+-------------
+
+If _-c_ is not specified, sway will look in several locations for your config
+file. The default one is provided at /etc/sway/config. The suggested location for
+your config file is ~/.config/sway/config. ~/.sway/config will also work, and the
+rest of the usual XDG config locations are supported. If no sway config is found,
+sway will attempt to load an i3 config from all the config locations i3 supports.
+If still nothing is found, you will receive an error.
+
+For information on the config file format, see **sway**(5).
+
+Authors
+-------
+
+Maintained by Drew DeVault <sir@cmpwn.com>, who is assisted by other open
+source contributors. For more information about sway development, see
+<https://github.com/SirCmpwn/sway>.
+
+See Also
+--------
+
+**sway**(5)

sway.5.txt

@@ -0,0 +1,90 @@
+/////
+vim:set ts=4 sw=4 tw=82 noet:
+/////
+sway (5)
+========
+
+Name
+----
+sway - configuration file and commands
+
+Description
+-----------
+
+A sway configuration file is a list of sway commands that are exected by sway on
+startup. These commands usually consist of setting your preferences and setting
+key bindings. An example config is likely present in /etc/sway/config for you to
+check out.
+
+All of these commands may be issued at runtime through **sway-msg**(1).
+
+Commands
+--------
+
+**bindsym** <key combo> <command>::
+	Binds _key combo_ to execute _command_ when pressed. You may use XKB key names
+	here (**xev**(1) is a good tool for discovering them). An example bindsym
+	command would be _bindsym Mod1+Shift+f exec firefox_, which would execute
+	Firefox if the alt, shift, and F keys are pressed together. Any valid sway
+	command is eligible to be bound to a key combo.
+
+**exec** <shell command>::
+	Executes _shell command_ with sh.
+
+**exec_always** <shell command>::
+	Like exec, but the shell command will be executed _again_ after *reload* or
+	*restart* is executed.
+
+**exit**::
+	Exit sway and end your Wayland session.
+
+**floating** toggle::
+	Toggles the "floating" status of the focused view.
+
+**focus** <direction>::
+	Direction may be one of _up_, _down_, _left_, _right_, or _parent_. The
+	directional focus commands will move the focus in that direction. The parent
+	focus command will change the focus to the parent of the currently focused
+	container, which is useful, for example, to open a sibling of the parent
+	container, or to move the entire container around.
+
+**focus_follows_mouse** <yes|no>::
+	If set to _yes_, the currently focused view will change as you move your
+	mouse around the screen to the view that ends up underneath your mouse.
+
+**kill**::
+	Closes the currently focused view.
+
+**layout** <mode>::
+	Sets the layout mode of the focused container. _mode_ can be one of _splith_,
+	_splitv_, or _toggle split_.
+
+**reload**::
+	Reloads the sway config file without restarting sway.
+
+**set** <name> <value>::
+	Creates a substitution for _value_ that can be used with $_name_ in other
+	commands.
+
+**split** <vertical|horizontal>::
+	Splits the current container, vertically or horiziontally. The letters "h" and
+	"v" can be used instead of the full words "vertical" or "horizontal".
+
+**splith**::
+	Equivalent to **split horizontal**.
+
+**splitv**::
+	Equivalent to **split vertical**.
+
+**fullscreen**:
+	Toggles fullscreen status for the focused view.
+
+**workspace** <name>:
+	Switches to the specified workspace.
+
+**workspace** <prev_on_output|next_on_output>:
+	Switches to the next workspace on the current output.
+
+**workspace** <name> output <output>::
+	Specifies that the workspace named _name_ should appear on the specified
+	_output_.