Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:
bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate
It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.
As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.
Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.
Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced
in commit 152e30c37 so it can work as intended.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This enables/disables adaptive synchronization on the output.
For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
This can be used as a workaround to flag terminal windows as urgent when
commands are completed, until urgency is introduced in the Wayland
protocol.
Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when
commands are completed, and use a terminal which uses one process per
window.
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.
Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.
This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.
Additionally, this renames output_enable to output_configure to better
describe the recent changes.
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.
output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.
This change also allows us to avoid an extraneous wlr_output_commit.
References: https://github.com/swaywm/sway/issues/4921
24e8ba048a did not take scaling into account.
The hotspot size used pixel coordinates, the absolute coordinates were logical,
and the relative coordinates were completely wrong.
This commit makes all coordinates use logical values. If
`"float_event_coords":true` is sent in the handshake message, coordinates are
sent as floating-point values.
The "scale" field is an integer containing the scale value.
Closes#4929
Replaces criteria_get_views with criteria_get_containers which can
return containers without views when the criteria only contains
container properties.
If a view is mapped to a workspace using an assign, the pid should still
be removed from the pid mapping list. This prevents child processes from
matching against it and mapping a view to a likely undesired workspace.
This adds a listener for the destroy event of the cursor image surface.
This prevents a use-after-free when the last visible image surface is
freed, there has not been a new cursor set, and the cursor is reshown.
Containers are always fixed to the pixel grid so position and size them
with integers instead of doubles.
Functionally this should be no different since rounding down is already
being done on things like layout. But it makes it clear what the
intention is and avoids bugs where fractional pixels are used. The
translating and moving code is still using doubles because the cursors
can have fractional pixels and thus the code is plumbed that way. But
that could also probably be changed easily by doing the integer
conversions earlier and plumbing with int.
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.
To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:
1. For the container we are actually resizing using floor() might result
in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
and then if the container being resized is the last all those extra
pixels would make the resize too large.
Fixes#4391
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
This is the second in a series of commits to refactor the color handling
in sway. This removes the duplicated color parsing code in
sway/commands/client.c. Additionally, this combines the parsing of
colors to float arrays with that in sway/config.c and introduces a
color_to_rgba function in commom/util.c.
As an added bonus, this also makes it so non of the colors in a border
color class will be changed unless all of the colors specified are
valid. This ensures that an invalid command does not get partially
applied.
This is the first in a series of commits to refactor the color handling
in sway. This changes parse_color to return whether it was success and
no longer uses 0xFFFFFFFF as the fallback color. This also verifies that
the string actually contains a valid hexadecimal number along with
the length checks.
In the process of altering the calls to parse_color, I also took the
opportunity to heavily refactor swaybar's ipc_parse_colors function.
This allowed for several lines of duplicated code to be removed.
This removes `seat <seat> keyboard_grouping keymap` and replaces it with
`seat <seat> keyboard_grouping smart`. The smart keyboard grouping will
group based on both the keymap and repeat info. The reasoning for this
is that deciding what the repeat info should be for a group is either
arbitrary or non-deterministic when multiple keyboards in the group have
repeat info configured (unless somehow exposed to the user in a
reproducible uniquely identifiable fashion).
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.
An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
Some wayland clients (mostly GTK3 apps) like eog or evince support
gestures like pinch-to-zoom. These gestures are given to clients
via the pointer_gestures_v1 protocol. This is already supported in
wlroots, so we just need to hook up the events here in sway.
Fixes#4724
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.
If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.
If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.
To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.
Fixes#4768
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.
This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
set_cloexec is defined by both sway and wlroots (and who-knows-else),
so rename the sway one for supporting static linkage. We also remove
the duplicate version of this in client/.
Fixes: https://github.com/swaywm/sway/issues/4677
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.
When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.
Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.
Closes: https://github.com/swaywm/wlroots/issues/1867
In case a tray icon cannot be found or does not have a desirable size,
swaybar retries the search again and again, which increases load on disk
and CPU. This commit solves it by storing target_size for each icon, so
that swaybar does not search for an icon of some size if it already tried to.
Fixes#3789.
Sway has basic support for drawing tablets, but does not expose
properties such as pressure sensitivity. This implements the wlr tablet
v2 protocol, providing tablet events to Wayland clients.
