Instead of having multiple tables, since we have room post split
of optimization and dump flags just move all the optimization and
dump flags into a common table.
We can if needed switch the flag entry size to a long in the future.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to control whether rule merging is done.
TODO: in the furture cleanup display of flags split accross two tables
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for more flags (not all of the backend dfa based),
rework the optimization and dump flag handling which has been exclusively
around the dfa up to this point.
- split dfa control and dump flags into separate fields. This gives more
room for new flags in the existing DFA set
- rename DFA_DUMP, and DFA_CONTROL to CONTROL_DFA and DUMP_DFA as
this will provide more uniform naming for none dfa flags
- group dump and control flags into a structure so they can be passed
together.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The check isn't correct, it should be checking for capability
MAC_ADMIN, but in the future that won't be correct either. Instead
rely on the kernel to check permission to load policy, which it alread
does as it is possible to by-pass the parser to load policy.
Also improve the error message when the kernel does deny
loading policy due to failed permission checks.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1044
Approved-by: Seth Arnold <seth.arnold@gmail.com>
Merged-by: John Johansen <john@jjmx.net>
The check isn't correct, it should be checking for capability
MAC_ADMIN, but in the future that won't be correct either. Instead
rely on the kernel to check permission to load policy, which it alread
does as it is possible to by-pass the parser to load policy.
Also improve the error message when the kernel does deny
loading policy due to failed permission checks.
Signed-off-by: John Johansen <john.johansen@canonical.com>
by adding a warning flag that is disabled by default. This will enable
devs to find when and where #include is in use by adding the compile
flag
--warn=pound-include
and can even abort policy compiles by using
--warn=pound-include --Werror=pound-include
The resulting messages look like
Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 5): deprecated use of '#include'
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Time-out
Ideally we would have a flag or something so the caller could choose
to handle symlinks, or traverse them. But since all callers currently
don't handle symlinks just handle them in the iterator.
Beyond fixing the early termination due to a failed symlink this also
fixes another case of failure in one job cause dir based loads to
terminate early. Which can result in partial loads.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/215
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/850
Signed-off-by: John Johansen <john.johansen@canonical.com>
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Profile includes can be setup to loop and expand in a pathalogical
manner that causes build failures. Fix this by caching which includes
have already been seen in a given profile context.
In addition this can speed up some profile compiles, that end up
re-including common abstractions. By not only deduping the files
being included but skipping the need to reprocess and dedup the
rules within the include.
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1184779
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/743
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
When building the parser with DEBUG=1 enabled the build fails with
the following error and warnings
In file included from parser_main.c:47:0:
parser_main.c: In function ‘void auto_tune_parameters()’:
parser_main.c:1421:35: error: ‘estimate_jobs’ was not declared in this scope
PDEBUG("Auto tune: --jobs=%d", estimate_jobs);
^
parser.h:201:37: note: in definition of macro ‘PDEBUG’
fprintf(stderr, "parser: " fmt, ## args); \
^~~~
parser_main.c:1421:35: note: suggested alternative: ‘estimated_jobs’
PDEBUG("Auto tune: --jobs=%d", estimate_jobs);
^
parser.h:201:37: note: in definition of macro ‘PDEBUG’
fprintf(stderr, "parser: " fmt, ## args); \
^~~~
parser.h:201:41: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long int’ [-Wformat=]
fprintf(stderr, "parser: " fmt, ## args); \
^
parser_main.c:1428:5: note: in expansion of macro ‘PDEBUG’
PDEBUG("Auto tune: --jobs=%d", jobs);
^~~~~~
Makefile:234: recipe for target 'parser_main.o' failed
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/745
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
65ba20b955 provides a fix for job
scaling but during a merge conflict part of the patch got dropped.
This is the missing portion of the patch that was approved as part
of MR703
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/703
Signed-off-by: John Johansen <john.johansen@canonical.com>
job scaling allows the parser to resample the number of cpus available
and increase the number of jobs that can be launched if cpu available
increases.
Unfortunately job scaling was being applied even when a fixed number
of jobs was specified. So
--jobs=2
doesn't actually clamp the compile at 2 jobs.
Instead job scaling should only be applied when --jobs=auto or when
jobs are set to a multiple of the cpus.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/703
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
The parsers default settings can OOM smaller special use systems
when building or loading policy. Use basic memory info and cpus to
tune the parser for lower resource environments.
Currently this just sets the jobs parameters if the default values
haven't been modified by user config or parameters. But in the
future this could add cache control and compile parameters.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/702
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
With the exception of the documentation fixes, these should all be
invisible to users.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/687
pwarn() prints "Warning" itsself, therefore it doesn't make sense to include/repeat that word in the actual warning text.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/650
Acked-by: John Johansen <john.johansen@canonical.com>
when a profile is being forced to complain a variation of the
following message is displayed
Warning from /etc/apparmor.d/usr.sbin.sssd (/etc/apparmor.d/usr.sbin.sssd line 54): Warning failed to create cache: usr.sbin.sssd
This is incorrect in that the parser doesn't even try to create the
cache, it just can't cache force complain profiles.
Output a warning message for this case that is correct.
Fixes: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1899218
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/649
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
A debug message in reset_parser() gives developers more data about how
the parser is behaving. In addition, it provides much needed context to
the relatively vague debug message in clear_cap_flag().
Another solution might be to pass the profile name into
clear_cap_flag(), however, clear_cap_flag() does not need the profile
name, except potentially for debugging purposes.
Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com>
--config-file is processed early in a separate argument processing
pass. Adjust --warn and --Werror processing so they are done in
both the early and late arg processing pass.
--warn and --Werror must be run in both argument processing passes
so that
1. They can be used with --config-file as long as they are specified
before --config-file (early pass)
2. They are not overriden by any flags set in the config file, as
command line options take priority over what is in the config
file (hence the need for reprocessing in the second pass)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make it so --Werror=show can display which flags have been set.
In addition update its --help=Werror flag table to display
./apparmor_parser --Werror=[Option]
instead of --Warn
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to show which warnings are enabled by specifying "show"
as an to the --dump, --warn, and --Optimize options
Eg.
--warn=show
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some warning flags are enabled by default, allow a warning to
be disbaled by specifying no- infront of the warning.
Eg.
--warn=no-deprecated
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add basic ability to treat a warning as an error and abort the compile
by specifying the new option --Werror.
--Werror
will turn all warnings into errors. Where if an warning type is
specified only that type of warning will be turned into an error.
--Werror=deprecated.
The full list of supported warning types can be found by using
apparmor_parser --help=warn
or
apparmor_parser --help=Werror
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make all warnings that go through pwarn() controllable by warning
flags. This adds several new warning control flags, documented in
--help=warn
Convert --debug-cache to be unified with warning flags. So it can be
set by either
--debug-cache
or
--warn=debug-cache
Also add an "all" option to be able to turn on all warnings.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the flag
--warn=dev
to be able to toggle several developer warnings with a single flag.
Note: --warn=all is being reserved for a larger patch to warnings
when all warnings are setup with control flags.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/600
Signed-off-by: John Johansen <john.johansen@canonical.com>
I screwed up adding the last option, yet again because
EARLY_ARG_CONFIG_FILE was define out of order, and adding the new
option seems to skip a number, ...
Switch to defines to make it easier to update, and keep all these
define numbers together in order.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/579
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add an option to allow setting/pinning the feature ABI and overriding
of ABI rules if they exist.
--override-policy-abi
This option is primarily for profile development and testing without
allowing adjusting feature abis temporarily without modifying the
profile.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/579
Signed-off-by: John Johansen <john.johansen@canonical.com>
In AppArmor 2 distros could pin the feature file being used by setting
the feature-file option in the config file.
With AppArmor 3 policy is now explicitly tagged with an abi rule.
The problem is the interaction on systems that have a mixture of
AppArmor 2 and AppArmor 3 policy and use feature pinning.
The feature pinning is required to make the apparmor 2 policy behave
as expected but it also overrides the abi rules that are explicitly
set as part of the policy. This means we either have the apparmor 2
pinned policy working as desired or the apparmor 3 policy, but not
both.
To fix this make setting the flag on command line or in config file
lower priority than an abi rule specified in policy. The ability
to override abi rules will be added in a separate patch.
The Priority ordering to determine the policy abi to use is
1. Use abi rules if present
2. if no abi rule use command line option
3. if no abi rule or command line option use config setting
4. if none of the above use the default abi
PR: https://gitlab.com/apparmor/apparmor/-/merge_requests/579
Signed-off-by: John Johansen <john.johansen@canonical.com>
The kernel and policy abis can be used to detect and support new
capabilities without having to update base_cap_names.h and and
rebuilding the compiler.
This is not perfect however in that the does not provide any backwards
compatibility mappings, so we still need to keep the internal
capability table.
Signed-off-by: John Johansen <john.johansen@canonical.com>
We need to be able to dynamically add capabilities to the capability
list so switch to using a dynamically allocated table that we can
extend.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add basic support for policy to specify a feature abi. Under the
current implementation the first feature abi specified will be
used as the policy abi for the entire profile.
If no feature abi is defined before rules are processed then the
default policy abi will be used.
If multiple feature abi rules are encountered and the specified
abi is different then a warning will be issued, and the initial abi
will continue to be used. The ability to support multiple policy
feature abis during a compile will be added in a future patch.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/491
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
The features abi adds the ability to track the policy abi separate
from the kernel. This allow the compiler to determine whether policy
was developed with a certain feature in mind, eg. unix rules.
This allows the compiler to know whether it should tell the kernel to
enforce the feature if the kernel supports the rule but the policy
doesn't use it.
To find if a feature is supported we take the intersection of what is
supported by the policy and what is supported by the kernel.
Policy encoding features like whether to diff_encode policy are not
influenced by policy so these remain kernel only features.
In addition to adding the above intersection of policy rename
--compile-features to --policy-features as better represents what it
represents. --compile-features is left as a hidden item for backwards
compatibility.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/491
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
Correct the long option used to print the cache directory.
Fixes: e9d9395f91 ("parser: Add option to print the cache directory")
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
The parser currently skips the cache if optimizations are specified
because it can not determine if the cached policy was compiled
with the specified optimization. However this causes cache misses
even if policy is cached with those options, and distros are setting
some optimizations by default.
Instead of skipping reading the cache if optimizations are set, users
can force overwriting the cache if needed, until the parser can
store aditional meta info in the cache.
BugLink: http://bugs.launchpad.net/bugs/1820068
Signed-off-by: John Johansen <john.johansen@canonical.com>
Update the indetation of work_spawn to correct for the changes made in
cb43e57d27 ("parser: Fix parser failing to handle errors when setting up work")
the indetation was not updated in that patch to make the changes made
easier to review and see in diffs.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parser is not correctly handling some error conditions when
dealing with work units. Failure to spawn work, access files, etc
should be returned where appropriate, and be able to abort processing
if abort_on_error is set.
In addition some errors are leading to a direct exit without checking
for abort_on_error.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=921866
BugLink: http://bugs.launchpad.net/bugs/1815294
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Eric Chiang <ericchiang@google.com>
Currently if stdin is used the warning
apparmor_parser: cannot use or update cache, disable, or force-complain via stdin
is always displayed but if caching has been disabled there is no need for
this message.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
Using stdin with --write-cache set results in
# apparmor_parser --show-cache --write-cache
Cache: added primary location '/var/cache/apparmor'
Warnung aus stdin (Zeile 1): Cache: added readonly location '/usr/share/apparmor/cache'
Warnung aus stdin (Zeile 1): apparmor_parser: cannot use or update cache, disable, or force-complain via stdin
Cache miss: stdin
Wrote cache: /var/cache/apparmor/9b2cd0d0.0/(null)
The "Wrote cache:" message is referencing a null value and should not
be displayed.
BugLink: http://bugs.launchpad.net/bugs/1787717
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Timeout
