Extend the policy syntax to have a rule that allows specifying all
permissions for all rule types.
allow all,
This is useful for making blacklist based policy, but can also be
useful when combined with other rule prefixes, eg. to add audit
to all rules.
audit access all,
Signed-off-by: John Johansen <john.johansen@canonical.com>
This lays the ground work for fine grained network mediation. The switch to using the rules class brings the advantages of shared infrastructure and is needed for tracking all the different combinations possible with finer control.
In addition range generation and support for large numbers (needed for ipv6) are added. This patchset does not make policy visible changes to network rules.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1104
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Since network rules don't use the "perms" attribute, it is using the
dedup class in which duplicate rules are removed.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
There is one significant difference in the encoding of the network
rules. Before this change, when the parser was encoding a "network,"
rule, it would generate an entry for every family and every
type/protocol. After this patch the parser should generate an entry
for every family, but the type/protocol is changed to .. in the pcre
syntax. There should be no difference in behavior.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
using dfprintf for error messages subjects them to the other
output controls and can cause them to be surpressed when they
shouldn't.
Instead use a dedicated error function and add a quiet flag to
allow silencing errors.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1102
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
using dfprintf for error messages subjects them to the other
output controls and can cause them to be surpressed when they
shouldn't.
Instead use a dedicated error function and add a quiet flag to
allow silencing errors.
Signed-off-by: John Johansen <john.johansen@canonical.com>
By default aa-status outputs with --verbose enabled - if --json is also
specified then aa-status would currently output in its first line "apparmor
module is loaded.":
aa-status --json | head -n1
apparmor module is loaded.
And only after this the actual json output would follow. This then results in
failures to parse this JSON output:
aa-status --json | jq .
parse error: Invalid numeric literal at line 1, column 9
This in turn then breaks tools / tests which expect the output of aa-status
--json to be purely json - e.g:
https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/-/blob/debian/unstable/debian/tests/policy-is-loaded#L12
So ensure dprintf() etc do not output when --json is specified to restrict the
output of aa-status to pure JSON.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1097
Approved-by: Seth Arnold <seth.arnold@gmail.com>
Merged-by: John Johansen <john@jjmx.net>
coverity is reporting an overrun of the profile_mode_table
217 if (merge_profile_mode(mode, rhs.mode) == MODE_CONFLICT)
>>> CID 322989: (OVERRUN)
>>> Overrunning array "profile_mode_table" of 6 8-byte elements at element index 6 (byte offset 55) using index "this->mode" (which evaluates to 6).
this is because it is being indexed by the profile_mode enum which can
go up to a 6th entry. The code tests for MODE_CONFLICT before using
the table so it shouldn't trigger a bug today, but play it safe for
the future and also get rid of the coverity scan error by adding a
"conflict" entry to the mode_table.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1098
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
SIGNAL makes more sense because it's about a single signal.
Besides that, a9494f5523 introduced a (at
that point broken) usage of SIGNAL which becomes valid with this commit.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1100
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
SIGNAL makes more sense because it's about a single signal.
Besides that, a9494f5523 introduced a (at
that point broken) usage of SIGNAL which becomes valid with this commit.
Documentation for io_uring and userns rules is missing from the
apparmor.d man page. Provide some basic documentation for them.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/349
Signed-off-by: John Johansen <john.johansen@canonical.com>
coverity is reporting an overrun of the profile_mode_table
217 if (merge_profile_mode(mode, rhs.mode) == MODE_CONFLICT)
>>> CID 322989: (OVERRUN)
>>> Overrunning array "profile_mode_table" of 6 8-byte elements at element index 6 (byte offset 55) using index "this->mode" (which evaluates to 6).
this is because it is being indexed by the profile_mode enum which can
go up to a 6th entry. The code tests for MODE_CONFLICT before using
the table so it shouldn't trigger a bug today, but play it safe for
the future and also get rid of the coverity scan error by adding a
"conflict" entry to the mode_table.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This adds two new profile flags
* `interruptible` which can be used with prompt
* `kill.signal=XXX` which can be used to set the signal used by kill mode or the kill rule prefix
In addition it adds a few cleanups and fixes around profile flag handling
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1096
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Add a flag that allows setting the signal used to kill the process.
This should not be normally used but can be very useful when
debugging applications, interaction with apparmor.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When merging flags with a disconnected_path specified, there is no
check for a conflict and we can just throw away (and leak) one of
the paths.
Signed-off-by: John Johansen <john.johansen@canonical.com>
We have a basic flagvals class it makes sense to move the parser
code into it, to help make management easier going forward.
Signed-off-by: John Johansen <john.johansen@canonical.com>
By default aa-status outputs with --verbose enabled - if --json is also
specified then aa-status would currently output in its first line "apparmor
module is loaded.":
aa-status --json | head -n1
apparmor module is loaded.
And only after this the actual json output would follow. This then results in
failures to parse this JSON output:
aa-status --json | jq .
parse error: Invalid numeric literal at line 1, column 9
This in turn then breaks tools / tests which expect the output of aa-status
--json to be purely json - e.g:
https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/-/blob/debian/unstable/debian/tests/policy-is-loaded#L12
So ensure dprintf() etc do not output when --json is specified to restrict the
output of aa-status to pure JSON.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
ask_exec() and ask_addhat() set
hashlog[aamode][full_profile]['final_name'].
While this was used to get profile and hat split, it was not used as key
for log_dict. This resulted in entries like
log_dict['PERMITTING']['foo//null-/usr/bin/cat']
which are obviously wrong.
Use final_name as log_dict key so that we end up with (assuming child
exec was selected)
log_dict['PERMITTING']['foo///usr/bin/cat']
This fixes a regression introduced in 3.1. Due to other changes in collapse_log() done in master, picking this into 3.1 isn't that easy. I'll submit a separate patch for 3.1.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1091
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
I propose this patch for all branches.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1090
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Merge request https://gitlab.com/apparmor/apparmor/merge_requests/1084
makes it so attach_disconnected.path implies attach_disconnected, so
remove superfluous flag from tests.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1093
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Now that we have `final_name` as shortcut for
`hashlog[aamode][full_profile]['final_name']`, update the code that used
the long version to make it more readable.
ask_exec() and ask_addhat() set
hashlog[aamode][full_profile]['final_name'].
While this was used to get profile and hat split, it was not used as key
for log_dict. This resulted in entries like
log_dict['PERMITTING']['foo//null-/usr/bin/cat']
which are obviously wrong.
Use final_name as log_dict key so that we end up with (assuming child
exec was selected)
log_dict['PERMITTING']['foo///usr/bin/cat']
Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1087
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
str.removeprefix() was introduced in Python 3.9. Replace it with
backwards-compatible code.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1085
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Currently you need to use attach_disconnected with
attach_disconnected.path=XXX to be able to attach to a different
location than / whic is ugly and redundant.
Make it so attach_disconnected.path implies attach_disconnected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1084
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
Currently you need to use attach_disconnected with
attach_disconnected.path=XXX to be able to attach to a different
location than / whic is ugly and redundant.
Make it so attach_disconnected.path implies attach_disconnected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for specifying the path prefix used when attach disconnected
is specified.
TODO: add regression tests
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/661
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Add support for specifying the path prefix used when attach disconnected
is specified. The kernel supports prepending a different value than
/ when a path is disconnected. Expose through a profile flag.
Signed-off-by: John Johansen <john.johansen@canonical.com>
