switch permission bits to use perm32_t type. This is just annotating
the code as it is no different than uint32_t at this time.
We do not convert the accept values as they may be mapped permission
bits or they may be and index value.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The use of xbits can not pass verification so we need to leave them
off this makes the profile a leaf profile.
Signed-off-by: John Johansen <john.johansen@canonical.com>
v1 of permstable32 has some broken verification checks. By using two
copies of a merged dfa and an xtable the same size of the permstable
we can work around the issue.
Signed-off-by: John Johansen <john.johansen@canonical.com>
There are two distinct declarations of perms_t.
rule.h: typedef uint32_t perms_t
hfa.h: class perms_t
these definitions clash when the front end and backend share more info.
To avoid this rename rule.h to perm32_t, and move the definition into
perms.h and use it in struct aa_perms.
Signed-off-by: John Johansen <john.johansen@canonical.com>
If extended permissions are supported use them. We need to build a
permission table and set the accept state of the chfa up as an index
into the table.
For now map the front end permission layout into the old format and
then convert that to the perms table just as the kernel does.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to parse the prompt qualifier but do not provide
functionality because the backend does not currently support prompt
permissions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This reverts commit 78ae956087.
And the add the correct padding fix, so that the header size and what is written match.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1274
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The kernel does not expect a name and it is not used even within the
parser so drop it. Correct the padding calculation.
sizeof(th_version)
includes the trailing \0 in the count so we should not be adding it
explicitly. Doing so made it seem like we were writing an extra byte
and messing things up, because the string write below did not include
the \0 which we had to add explicitly.
Switch to writing the th_version using size_of() bytes as is used in
the pad calculation, to avoid confusion around the header padding.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The abi is not being respected by mqueue rules in many cases. If policy
does ot specify an mqueue rule the abi is correctly applied but if
an mqueue rule is specified explicitly or implicitly (eg. allow all).
without setting the mqueue type OR setting the mqueue type to sysv.
The abi will be ignored and mqueue will be enforced for policy regadless.
Known good mqueue rule that respects abi
mqueue type=posix,
# and all variations that keep type=posix
Known bad mqueue rules that do not respect abi
mqueue,
# and all variants that do not specify the type= option
mqueue type=sysv,
# and all variants that specify the type=sysv option
Issue: https://gitlab.com/apparmor/apparmor/-/issues/412
Fixes: d98c5c4cf ("parser: add parser support for message queue mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
This reverts commit 78ae956087.
Commit 78ae956087 causes policy to not
to conform to protocol as determined by the kernel. Technically the
reverted patch is correct and the kernel is wrong but we can not
change 15 years of history.
The reason it breaks the policy in the kernel is because the kernel
does not use the name field, and does not expect it. It just expects
the size with a single trailing 0. This doesn't break because this
section is all padded to 64 bytes so writing the extra 0 doesn't
hurt as it is effectively just manually adding to the padding.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Without AA_MAY_MOUNT, mount was not allowed by the allow all
rule. AA_DUMMY_REMOUNT does become AA_MAY_MOUNT, but it fixes the
flags to remount only, so other options are not included. Also, add
allow all rule testcases to the mount regression tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/410
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
By specifying 0 in the unix type, all rules were allowing only the
"none" type, when it wanted to allow all types, so replace it by
0xffffffff. Also, add this testcase to the unix regression tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/410
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Update the state machine readme to better reflect how the chfa is
encoded and works. It still needs a lot more but fixes several errors
in the doc and adds some info about state differential encoding, oobs,
and comb compression.
In addition fix an off by own error during chfa encoding. This has
likely never triggered as it gets hidden by being in a section that
is being in a section that is padded to an 8 byte boundary.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1244
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Expression simplification can get into an infinite loop due to eps
pairs hiding behind and alternation that can't be caught by
normalize_eps() (which exists in the first place to stop a similar
loop).
The loop in question happens in AltNode::normalize when a subtree has
the following structure.
1. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
2. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt alt
/\ /\
/ \ / \
/ \ / \
eps eps eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
5. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
6. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
back to beginning of cycle
Fix this by detecting the creation of an eps_pair in rotate_node(),
that pair can be immediately eliminated by simplifying the tree in that
step.
In the above cycle the pair creation is caught at step 3 resulting
in
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
which gets reduced to
alt
/\
/ \
/ \
eps eps
breaking the normalization loop. The degenerate alt node will be caught
in turn when its parent is dealt with.
This needs to be backported to all releases
Closes: https://gitlab.com/apparmor/apparmor/-/issues/398
Fixes: 846cee506 ("Split out parsing and expression trees from regexp.y")
Reported-by: Christian Boltz <apparmor@cboltz.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Closes#398
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1252
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Expression simplification can get into an infinite loop due to eps
pairs hiding behind and alternation that can't be caught by
normalize_eps() (which exists in the first place to stop a similar
loop).
The loop in question happens in AltNode::normalize when a subtree has
the following structure.
1. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
2. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt alt
/\ /\
/ \ / \
/ \ / \
eps eps eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
5. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
6. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
back to beginning of cycle
Fix this by detecting the creation of an eps_pair in rotate_node(),
that pair can be immediately eliminated by simplifying the tree in that
step.
In the above cycle the pair creation is caught at step 3 resulting
in
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
whch gets reduces to
alt
/\
/ \
/ \
eps eps
breaking the normalization loop. The degenerate alt node will be caught
in turn when its parent is dealt with.
This needs to be backported to all releases
Closes: https://gitlab.com/apparmor/apparmor/-/issues/398
Fixes: 846cee506 ("Split out parsing and expression trees from regexp.y")
Reported-by: Christian Boltz <apparmor@cboltz.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Adding mediation classes in unconfined profiles caused nested profiles
to be mediated, inside a container for example.
As a first step, skip the addition of mediation classes into the dfa.
The creation of unprivileged user namespaces is an exception, where we
always want to mediate it.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2067900
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
technically a # leading a value in an assignment expression is allowed,
however people are also using it to a comment at the end of a line.
ie.
```
@{var1}=value1 # comment about this value or for a given system
```
this unsurprisingly leads to odd/unexpected behavior when the variable
is used.
```
allow rw /@{var1},
```
expands into
```
allow rw /{value1,#,comment,about,this,value,or,for,a,given,system},
```
change a leading # of a value in an assignment expression to a comment.
If the # is really supposed to lead the value, require it to be escaped
or in quotes.
ie.
```
@{var1}=value1 \#not_a_comment
```
Note: this could potentially break som policy if the # was used as the
leading character for a value in an assignment expression, but
is worth it to avoid the confusion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1255
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The parser writes
sizeof(th)) + th_version + (char)0 + name + (char)0;
but the padding currently is computed as
sizeof(th)) + th_version + name + (char)0;
missing the internal (char)0, add 1 to the pad and fill to ensure
this is correct.
Reported-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Update the state machine readme to better reflect how the chfa is
encoded and works. It still needs a lot more but fixes several errors
in the doc and adds some info about state differential encoding, oobs,
and comb compression.
Signed-off-by: John Johansen <john.johansen@canonical.com>
technically a # leading a value in an assignment expression is allowed,
however people are also using it to a comment at the end of a line.
ie.
@{var1}=value1 # comment about this value or for a given system
this unsurprisingly leads to odd/unexpected behavior when the variable
is used.
allow rw /@{var1},
expands into
allow rw /{value1,#,comment,about,this,value,or,for,a,given,system},
change a leading # as value in an assignment expression to a comment.
If the # is really supposed to lead the value, require it to be escaped
or in quotes.
ie.
@{var1}=value1 \#not_a_comment
Note: this could potentially break som policy if the # was used as the
leading character for a value in an assignment expression, but
is worth it to avoid the confusion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Shellcheck is complaining that some of the functions are never called,
but they are called from rc.apparmor.functions, causing a false
positive.
This issue only appears in shellcheck version 0.9.0, which is the one
used in ubuntu 24.04, that's why it only failed in the pipeline now.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/388
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Add a flag that allows setting the error code AppArmor will send when
an operation is denied. This should not be used normally.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This updates the man page for the recent inet mediation patch.
This is an extension of MR 1202, it adds a patch that changes the anonymous ip address anon to be ip address none which is a better fit.
This patch adds documentation of the recent network changes which extended all network rules to support access permissions, and added address and port matching for inet and inet6 families.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1213
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
inet mediation allows specifying rules for sockets that don't have
a known address, whether because it is unbound or because the
kernel doesn't make the address available.
The current code uses the word anon for anonymous, but that has
proven to be unclear. Switch from using anon to none, to emphasize
that this is a case where there just isn't an address to use as
part of mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When a family is specified in the network rules, we have to make sure
the conditionals match the family. A netlink rule should not be able
to specify ip and port for local and remote (peer) sockets, for example.
When type or protocol is specified in network rules along with inet
conditionals, we should only generate rules for the families that
support those conditionals.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The abstraction lxc/start-container shipped by the liblxc-common
package uses the following mount rule which was not allowed by our
regexes:
mount options=(rw, make-slave) -> **,
mount options=(rw, make-rslave) -> **,
Since in AppArmor regex ** includes '/' but * by itself doesn't, I'm
adding explicit support for **.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
